SMART Living Watch Help
How to use your new Zanthion SMART Watch
Thank you for purchasing fall and wandering protection from Zanthion. Your new wearable automatically knows when you fall, how many steps you have taken, whether you are active or not, your heart rate, and whether you are gone from home too long. Of course we notify whoever you would like if there seems to be a problem. Your watch comes with a cellular plan for several weeks. If you find calling the watch directly is advantageous you can renew a monthly plan with Zanthion.
Navigating
You can navigate this help page by hovering over the small circles on the right side of the page

Setup WiFi
Press 5 times on the icon
Press 5 times on the icon to the right ot the SOS button. You will be informed of how many more times you must press to enter the settings menu.
Scroll to settings
Scroll to the settings menu and press the icon.
Scroll to connect
Scroll to the connect icon and press
Press Wi-Fi
Press Wi-Fi
Scroll to your network name
Scroll to your network name and press
Enter the network password
Enter your network password and press connect
Swipe left to right 4 times
Swipe left to right 4 times and push the back arrow
Installing Android Caregiver
Get started as a just in time caregiver by downloading the Zanthion Caregiver Application. You will be notified of help requests, falls, and wandering. You can also call the the Zanthion SMART Watch directly when it arrives.
Login with the email and password for the caregiver that you used when registering. If you have forgotten them and email was sent to the caregiver.
Installing the Zanthion Watch Gateway
Installation of the Zanthion Watch Gateway requires an internet connection. Instructions for connecting to the internet using WiFi are here.
Verifying the Zanthion Watch Gateway Install
Uninstalling the Zanthion Watch Gateway
Setting Up Fall Sensitivity
Not all people are created equal so Zanthion made it so you can set the system for how sensitive it is to falls.
Lifestyle Settings
Lifestyle settings allows you to change how sensors react to the person being measured, how often measurements take place, during what times of day they take place, and how much time there is between a measurement and a warning.
Watch Activity Level
Select watch settings so that you can set the activity level of the person wearing the watch. Setting the activity level sets the fall characteristics. If you want to start out with the watch being very sensitive to falls select Needs Help Walking. You can always go back here and change it to Healthy.
Setting Up Heart Rate Settings
The Zanthion Watch is shipped with heart rate being checked 4 times between 8:00 AM and 10:00 PM. A warning notification will occur if the heart rate is below 50 or above 150. You can change these defaults by selecting heart rate settings from lifestyle setup.
Lifestyle Settings
Lifestyle settings allows you to change how sensors react to the person being measured, how often measurements take place, during what times of day they take place, and how much time there is between a measurement and a warning.
Watch Heart Rate Settings
Select heart rate settings so that you can set between what times and how often the heart rate will be checked. You can set the begin time, the end time, how many times a day, the low heart rate warning threshold, the high heart rate warning threshold, and how many minutes of grace is given before the warning is sent.
How to Use the Zanthion Dashboard for Real Time Observation
Zanthion is more than an alerting platform, it is a health platform. You can observe trends over time in steps, activity, heart rate and behavior. When you log into the Zanthion platform you will be immediately sent to the dashboard for your family. If you have multiple people wearing watches in your home or homes they will all be shown here.
Real Time Dashboard
When you login into Zanthion you are directed immediately to a real time dashboard of activity. Each person being monitored is shown in the dashboard with their name, last heart rate, number of steps, active hours, how long they have been at the current location, and the current status.